All the Flat Roof Lantern lights are bespoke and are supplied specifically for you.

The Lanterns are manufactured from a white Ultraframe Classic Roof System, with chambered top caps, and a white Eurocell Ultimte 70mm profile for the 350mm high vertical sides, with full steel reinforcement, if required.

The Lanterns vertical glazing is a 28mm double glazed unit consisting of a float ‘K’ glass and the roof glazing a 24mm double glazed unit consisting of a 4mm Pilkington’s Activ Blue or neutral toughened outer pane, a 16mm argon filled void and a 4mm Pilkington ‘K’ toughened inner pane.

To be able to order your Lantern light, from our 36 options, see our size chart and measuring diagram.

The sizes shown are internal ones. So if you have an opening size of 690x2430 then you would need to order from the 750x2500mm menu making sure to add the 690x2430mm in the boxes provided, to confirm the sizes for manufacture. An internal measurement of +751mm would take you to the next size up, 1000mm, and an internal measurement of +2501mm would need to be quoted from our sales office.

The Lantern is supplied with white guttering & downpipe and an optional finial detail.

We also have choices of ventilation options for you to add on to the Lantern light order too.

Please note that the shorter side will always be considered the span and will therefore be the hipped end too.

All our Lanterns need to fit onto a waterproofed builders’ kerb (waterproofing & builders’ kerb by others)

We have a fitting guide if you wish to carryout your own installation which you can download one from our download section or, if you prefer, select 'Yes' to the 'Do you require a free quote for fitting' option when you make your order so then we can provide you with an extra over cost for our fitting teams to install on your behalf.

• «« Start
• « Prev
• 1
• Next »
• End »»